Bin Shellac-base Interior And Spot Exterior Primer, Flat White, 1 Gal Bucket/pail, 2/carton

Looking for a “silver bullet” primer that covers everything? Choose the primer that contractors have kept in their vans for decades: Zinsser® BIN® Shellac-Base Primer. As the original shellac primer/sealer, nearly nothing is better at permanently covering bleeding wood knots, sap streaks and graffiti as well as water, grease, rust, smoke and many other types of stains. This pioneering primer/sealer permanently blocks most every kind of odor, too. When it comes to preparing indoor surfaces for topcoats while sealing nearly any porous surface, especially where excellent enamel holdout is required, few primers match BIN® Shellac-Base Primer. It can even be applied when temperatures dip below freezing. Though it's designed specifically for indoor application to ceilings, walls, doors, trim, cabinets, furniture and more, this versatile product is also capable of spot priming certain exterior surfaces (see product packaging for more details).

Age Recommendation	Ages 16 and Up
Applicable Surface Material	Cement
Application Method	Brush
Application Temperature Range	0º and 90ºF
Binder/Vehicle Ingredient(s)	Shellac
Color Family	White
Color(s)	White
Cure/Dry-Time Range	20 min (Touch)
Diluent/Solvent Ingredient(s)	Denatured Alcohol
Disclaimer Statement	B-I-N Shellac-Base Primer is not recommended for whole surface exterior application or for application to floors
decks	decks
or any surface subject to immersion or prolonged contact with water. Apply only when air	or any surface subject to immersion or prolonged contact with water. Apply only when air
material	material
and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.	and surface temperatures are between 0 and 90ºF (-18 and 32ºC) and the relative humidity is below 70%. Do not apply B-I-N if surface temperature is within 15°F of the dew point. Substrate moisture should not exceed 12%. DO NOT THIN.
Finish/Sheen	Flat
Footnote 1	Recommended Dry Film Thickness (DFT) Per Coat: 0.75 to 0.9 mils
Footnote 2	Recommended Wet Film Thickness to Achieve DFT: 2.5 to 3 mils
Global Product Type	Building/Construction Paints & Primers
Intended Application Environment	Interior/Exterior
Maximum Coverage Area	500 sq ft
Packaging Type	Bucket/Pail
Paint Sub-Category	Primer
Shellac-Based	Shellac-Based
Post Recycled %	0%
Product Biodegradability in Days	0
Product Biodegradability Indicator	N
Product Compostability Indicator	N
Recommended Level of Ventilation	Moderate
Recycled Content %	0%
Ship Class Code	A
Total Recycled %	0%
Volume Capacity	1 gal